{
  "schema": "brand-kit@2",
  "palette": {
    "primary": "#299093",
    "accent": "#299093",
    "ink": "#061A1E",
    "paper": "#E8E5E0",
    "surface": "#FFFFFF",
    "muted": "#DBD7CA",
    "secondary_accent": "#EF6156",
    "tertiary_accent": "#FFBD00",
    "note": "All hex values from computed styles (measure/) and the site stylesheet tokens --color-*; none read from screenshot pixels. Token names are the site's own: accent-primary/secondary/tertiary, black, grey-10/50/100, white. There is no dark band anywhere on the site.",
    "extras": [
      {
        "name": "Grey 50 (--color-grey-50), root ground",
        "hex": "#E8E5E0",
        "role": "page ground: header, hero, copy bands, footer surround",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json",
        "coverage": "the majority of the page on desktop and phone (root ground; every band not listed below)"
      },
      {
        "name": "Grey 100 (--color-grey-100)",
        "hex": "#DBD7CA",
        "role": "second ground: the photo carousel bands, the 400lvh \"Intelligence on the factory floor\" scroll section, the empty media frame, and skill chips",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json",
        "coverage": "about 44% of the desktop page area by measured band boxes (mostly the scroll section, which the 3D scene covers)"
      },
      {
        "name": "Grey 10 (--color-grey-10)",
        "hex": "#F6F4F0",
        "role": "footer bar: a full-round 64px pill (desktop) or 40px-radius card (phone) holding contact and legal links",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json",
        "coverage": "under 1%"
      },
      {
        "name": "White (--color-white)",
        "hex": "#FFFFFF",
        "role": "careers card ground (40px radius, 1px ink border), task card, pill highlight on ink text, and the floating capsule/circle shapes",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json",
        "coverage": "about 5% of desktop page as card ground, plus the floating shapes"
      },
      {
        "name": "Black (--color-black), ink",
        "hex": "#061A1E",
        "role": "all text, the mark and wordmark, 1px card borders, and ink pill highlights with white text",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json",
        "coverage": "every line of type"
      },
      {
        "name": "Accent primary teal (--color-accent-primary)",
        "hex": "#299093",
        "role": "every button (Join us, Contact, See open roles), teal pill highlights with white text, the active carousel indicator, 3D illustration accent parts",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json",
        "coverage": "about 1-2% of the page"
      },
      {
        "name": "Accent tertiary coral (--color-accent-tertiary)",
        "hex": "#EF6156",
        "role": "pill highlights with ink text (capable, learning on the job, The work we), lone circle markers, button hover wipe, robot fingertips and lights in the 3D scenes",
        "prov": "observed",
        "source": "mindrobotics.com site stylesheet (CSS custom properties), observed 2026-11-10; inline pill styles in the home page HTML",
        "coverage": "under 1%"
      },
      {
        "name": "Accent secondary yellow (--color-accent-secondary)",
        "hex": "#FFBD00",
        "role": "pill highlight (Hands on), lone circle marker, button hover wipe, box handles and parts in the 3D scenes",
        "prov": "observed",
        "source": "mindrobotics.com site stylesheet (CSS custom properties), observed 2026-11-10; inline pill styles in the home page HTML",
        "coverage": "under 1%"
      },
      {
        "name": "Pill grey",
        "hex": "#8F8C83",
        "role": "one pill highlight with ink text (every day); inline style, not a token",
        "prov": "observed",
        "source": "home page HTML inline style, observed 2026-11-10",
        "coverage": "under 0.1%; one place"
      },
      {
        "name": "Ink 50% (bg-black/50)",
        "hex": "#061A1E80",
        "role": "Contact dialog scrim: ink at 50% over the page with an 8px backdrop blur",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      {
        "name": "Scene hairline",
        "hex": "#D3D0C5",
        "role": "1px top border of the 400lvh \"Intelligence on the factory floor\" section (border-t on #DBD7CA); the only hairline divider on the page",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json",
        "coverage": "one 1px line"
      }
    ]
  },
  "typography": {
    "display": {
      "family": "Figtree",
      "weight": 700,
      "line_height": 1.3,
      "tracking": -0.04,
      "case": "sentence",
      "fallback_stack": "\"Figtree\", \"Helvetica Neue\", Arial, sans-serif",
      "real": "Centra No.2 (site font-face CentraNo2, weights 400, 500, 700; roman only); proprietary",
      "stand_in": true,
      "note": "Stand-in for Centra No.2 700. Site sizes: H1 36 / 80px (phone / desktop), pill heads 28 / 56px, closer 270px (desktop only), careers head 28 / 44px weight 500, task-card title 20 / 32px weight 500. Calibrated 2026-11-10 by rendering the same lines in CentraNo2 on mindrobotics.com and in Google-Fonts candidates on the same page (headless). Width ratio to Centra at the site tracking, display \"Mind Robotics is building\" 80/700: Figtree 0.970, Albert Sans 0.995, Onest 1.016, Outfit 0.943, DM Sans 1.035, Plus Jakarta Sans 1.018, Manrope 1.023, Urbanist 0.935; \"Our first robots are\" 56/700: Figtree 0.972, Albert Sans 0.974, Onest 1.004; \"What you build on the bench\" 44/500: Figtree 0.961, Albert Sans 0.984, Onest 1.009; body line 20/400: Figtree 0.966, Albert Sans 0.996, Onest 1.022. Ink per px of line (Centra 29 / 19 / 12 / 4): Figtree 28 / 18 / 11 / 4, Albert Sans 26 / 17 / 11 / 4, Onest 29 / 19 / 12 / 4. x-height / size (Centra 0.494): Figtree 0.500, Albert Sans 0.500, Onest 0.527. Choice: Figtree with tracking opened to close the width gap, because once width is equalised it is nearest on ink (within 1 unit) and x-height (+1%); Onest matches ink but its x-height is 7% taller; Albert Sans is 10% lighter at display sizes. Width-matched Figtree tracking: 700 display/pill heads -0.027em (Centra -0.04em), 500 heads -0.012em (Centra -0.03em), 400 body +0.016em (Centra 0). Round 1 correction (2026-11-10, re-measured on mindrobotics.com): at -0.027em Figtree matched Centra's line width but its letterfit and word spaces read loose against Centra's compact pill masses. Use the site's own -0.04em for every 700 head (H1, pill heads, closer, buttons). Measured at -0.04em: \"Mind Robotics is building\" 80/700 Centra 866px, Figtree 840px; \"Our first robots are\" 56/700 Centra 462px, Figtree 449px; \"Get to\" 270/700 Centra 733px, Figtree 722px. Accept the 1.5-3% narrower lines; do not raise the size. Cap height is identical (0.70em both); x-height Figtree 0.500 vs Centra 0.494. 500 heads stay -0.012em and body +0.016em (width-matched, no change). Calibration is complete; Figtree is the calibrated stand-in.",
      "prov": "observed",
      "source": "measure/home-desk.json, measure/home-phone.json; mindrobotics.com site stylesheet (CSS custom properties), observed 2026-11-10",
      "calibrated": "2026-11-10"
    },
    "body": {
      "family": "Figtree",
      "weight": 400,
      "line_height": 1.5,
      "tracking": 0.016,
      "case": "sentence",
      "fallback_stack": "\"Figtree\", \"Helvetica Neue\", Arial, sans-serif",
      "real": "Centra No.2",
      "stand_in": true,
      "note": "Stand-in for Centra No.2 400. Paragraph large 18 / 20px line 1.5, card body 13 / 16px, footer 13px line 1.4, chips 13 / 16px. Calibrated 2026-11-10 by rendering the same lines in CentraNo2 on mindrobotics.com and in Google-Fonts candidates on the same page (headless). Width ratio to Centra at the site tracking, display \"Mind Robotics is building\" 80/700: Figtree 0.970, Albert Sans 0.995, Onest 1.016, Outfit 0.943, DM Sans 1.035, Plus Jakarta Sans 1.018, Manrope 1.023, Urbanist 0.935; \"Our first robots are\" 56/700: Figtree 0.972, Albert Sans 0.974, Onest 1.004; \"What you build on the bench\" 44/500: Figtree 0.961, Albert Sans 0.984, Onest 1.009; body line 20/400: Figtree 0.966, Albert Sans 0.996, Onest 1.022. Ink per px of line (Centra 29 / 19 / 12 / 4): Figtree 28 / 18 / 11 / 4, Albert Sans 26 / 17 / 11 / 4, Onest 29 / 19 / 12 / 4. x-height / size (Centra 0.494): Figtree 0.500, Albert Sans 0.500, Onest 0.527. Choice: Figtree with tracking opened to close the width gap, because once width is equalised it is nearest on ink (within 1 unit) and x-height (+1%); Onest matches ink but its x-height is 7% taller; Albert Sans is 10% lighter at display sizes. Width-matched Figtree tracking: 700 display/pill heads -0.027em (Centra -0.04em), 500 heads -0.012em (Centra -0.03em), 400 body +0.016em (Centra 0).",
      "prov": "observed",
      "source": "measure/home-desk.json, measure/home-phone.json; mindrobotics.com site stylesheet (CSS custom properties), observed 2026-11-10",
      "calibrated": "2026-11-10"
    },
    "wordmark": {
      "note": "MIND and ROBOTICS are custom rounded-terminal capitals drawn as SVG paths (viewBox 333x100 and 679x100); not a typeface, never typeset.",
      "prov": "observed",
      "source": "https://www.mindrobotics.com/"
    },
    "mono": {
      "note": "--font-mono is defined as the system ui-monospace stack but no measured text uses it.",
      "prov": "observed",
      "source": "mindrobotics.com site stylesheet (CSS custom properties), observed 2026-11-10"
    }
  },
  "style": {
    "button_shape": "Full-round pills, 40px tall, padding 0 16px, 24px Centra No.2 700 white label (tracking -0.04em), teal #299093, no icon, border or shadow. Hover: three full-pill layers slide in from the left over the button, coral #EF6156 (0ms), yellow #FFBD00 (50ms), ink #061A1E (120ms), each 0.6s cubic-bezier(0.645, 0.045, 0.355, 1); the end state is an ink pill with the white label.",
    "links": "Footer links are 13px ink text with 20px filled icons (location pin, phone, mail); no underline.",
    "corners": "Everything round: pills and buttons full-round; radius tokens 24px (small: task card), 40px (medium: careers card on phone, footer card on phone, photo crops), 72px (large: careers card at the widest breakpoint only; it renders at 40px at 1440). Photos in bands are square-cut full width; inline photos round at 40px.",
    "linework": "1px #061A1E borders on the careers card and the empty media frame; the 3D scenes have dark ink outlines. No hairline dividers elsewhere.",
    "density": "Very airy: section padding 112px (desktop) / 64px (phone) and up to 200px; 32px side gutters desktop, 24px phone; body copy capped near 560px wide.",
    "shadow": "None.",
    "prov": "observed",
    "source": "measure/home-desk.json, measure/home-phone.json; mindrobotics.com site stylesheet (CSS custom properties), observed 2026-11-10; screenshots ref/"
  },
  "voice": {
    "tone": [
      "Plainspoken",
      "Grounded",
      "Optimistic",
      "Industrial",
      "Humble"
    ],
    "notes": [
      "No brand or writing guide is published; every rule below is observed on mindrobotics.com (one page of copy)."
    ],
    "rules": [
      {
        "id": "pill-heads-no-period",
        "kind": "observed",
        "text": "Section heads are sentence case, split over two or three highlighted lines, with no end period.",
        "examples": [
          "Our first robots are / learning on the job",
          "Intelligence on / the factory floor",
          "The work we / always imagined / machines could do",
          "Hands on with hardware every day"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "statement-period",
        "kind": "observed",
        "text": "Full-sentence statements (the H1 and the careers card head) end with a period.",
        "examples": [
          "Mind Robotics is building universally capable robots to transform industrial work.",
          "What you build on the bench today changes how factories run tomorrow.",
          "Our aim is to make manufacturing safer, more efficient, and more globally competitive by augmenting human capability."
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "we-voice",
        "kind": "observed",
        "text": "First person plural for the company; 'you' only in the careers pitch.",
        "examples": [
          "We're starting where the problems are hardest",
          "Our foundation models learn spatial reasoning",
          "Our robots take on the intricate, often grueling work",
          "Join us if you value ownership, humility"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "bold-lead-in",
        "kind": "observed",
        "text": "The first two or three words of each section's opening paragraph are bold.",
        "examples": [
          "We're starting",
          "With Rivian",
          "Our robots take on"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "short-name",
        "kind": "observed",
        "text": "'Mind' alone in running copy once the full name is established.",
        "examples": [
          "Mind is collecting video data",
          "Mind’s live dataset",
          "Mind robots can finally help",
          "At Mind, we believe",
          "Get to know Mind"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "concrete-floor-words",
        "kind": "observed",
        "text": "Uses concrete factory and hands words across the page (never twice in one sentence) (factory floor, line, production, hardware, hands, real) and names skills as plain nouns; no numbers, no superlatives about AI.",
        "examples": [
          "the factory floor",
          "as it happens on the line",
          "real production hours",
          "human hands",
          "Pick and place / Sorting / Fastening / Connectors"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "serial-comma",
        "kind": "observed",
        "text": "Uses the serial (Oxford) comma in lists of three.",
        "examples": [
          "spatial reasoning, object dynamics, and tool manipulation",
          "reasoning, variability, and dexterity",
          "safer, more efficient, and more globally competitive"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "short-buttons",
        "kind": "observed",
        "text": "Buttons are one to three sentence-case words with no arrow.",
        "examples": [
          "Join us",
          "Contact",
          "See open roles"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "no-echo",
        "kind": "observed",
        "text": "Each concrete noun appears once per sentence: the site never repeats line, work, real or factory inside one sentence, and adjacent sentences vary them (line / production facility / vehicle lines / factory floor). New copy keeps one idea per clause and drops a repeated noun rather than restating it.",
        "examples": [
          "capturing live, high-variability work as it happens on the line",
          "training on active vehicle lines",
          "inside a live production facility"
        ],
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      }
    ],
    "approved": [
      "factory floor",
      "universally capable robots",
      "industrial work",
      "foundation models",
      "live dataset",
      "hands on with hardware",
      "augmenting human capability",
      "put code into motion"
    ],
    "banned": [],
    "banned_note": "No banned-word list is published; see gaps."
  },
  "spec": {
    "source": "https://www.mindrobotics.com/ (observed 2026-11-10)",
    "signature": [
      {
        "id": "highlight-pills",
        "name": "Highlighter-pill headlines",
        "where": "Every section head and the H1",
        "spec": "Words or whole lines sit in full-round pills, Centra No.2 700. Pill height is fixed per head role, not a ratio: H1 and the centred careers head 104px (80px type) desktop / 45px (36px type) phone; section heads 80px (56px type) desktop / 40px (28px type) phone. Teal #299093 or ink #061A1E pills take white text; coral #EF6156, yellow #FFBD00, white #FFFFFF and grey #8F8C83 pills take ink #061A1E text. Lines stack left-aligned (5px apart desktop, 2px phone for section heads; 112 / 46.8px pitch for the H1); a lone same-height colored circle sometimes leads the second line. Each pill wipes in from the left through the other accent colors (0.6s, 50ms per layer).",
        "dont": "Rectangular highlight boxes, gradient pills, pills on body copy, more than three pills per line",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (HTML inline pill styles); measure/home-desk.json, measure/home-phone.json"
      },
      {
        "id": "capsule-dot-shapes",
        "name": "Capsules and dots from the mark",
        "where": "Hero, top of the photo band, \"Get to know Mind\" closer, phone footer",
        "spec": "Large white #FFFFFF shapes taken from the m mark: capsules (aspect 2:5) and circles, each 32% of its row's content width: hero 420x1050 capsules and a 420px circle desktop (109x274 and 109px phone); closer 341x852 capsules and a 341px circle desktop (90x226 and 90px phone); 288px (78px phone) circles on the photo band edge. They float behind type and the 3D arm on the #E8E5E0 ground; the hero's centre circle sits in front of the arm.",
        "dont": "Other geometric shapes, outlines, colored capsules",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "stone-grounds",
        "name": "Warm stone grounds, ink type",
        "where": "Whole site",
        "spec": "#E8E5E0 page ground, #DBD7CA second ground, #F6F4F0 footer bar, #FFFFFF cards; all type #061A1E. No dark bands, no full-bleed color bands.",
        "dont": "Pure white pages, dark mode bands, cool greys",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json"
      },
      {
        "id": "cel-shaded-3d",
        "name": "Cel-shaded 3D line illustration",
        "where": "Hero robot arm, \"Intelligence on the factory floor\" scroll scenes",
        "spec": "Real-time 3D models (/models/*.glb) drawn flat: off-white #E8E5E0-family surfaces with soft grey shading, thin dark ink outlines, teal #299093 joints and parts, yellow #FFBD00 handles and parts, coral #EF6156 fingertips and lights; isometric factory on a faint square floor grid; clusters of pale dots, beige squares and teal x marks drift around the robot.",
        "dont": "Photoreal renders, glossy materials, gradients, heavy shadows",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "id": "giant-type",
        "name": "Giant rounded wordmark and display type",
        "where": "Hero, closer",
        "spec": "Hero: MIND (575px wide) left and ROBOTICS (1173px wide) right-aligned on the next line, each 12vw tall, ink, letters revealing one by one. Closer: \"Get to / know / Mind\" at 270px weight 700, line 0.8, tracking -0.04em, staggered left / right / left over white capsules.",
        "dont": "Centred hero, the wordmark retyped in a font",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json"
      },
      {
        "id": "teal-pill-buttons",
        "name": "Teal pill buttons",
        "where": "Header (Join us, Contact), careers card (See open roles)",
        "spec": "40px tall full-round #299093 pill, 24px bold white label, padding about 16px, no icon; hover wipe of yellow, coral, ink.",
        "dont": "Outline or ghost buttons, arrows, square corners",
        "prov": "observed",
        "source": "measure/home-desk.json, measure/home-phone.json"
      }
    ],
    "icons": {
      "style": "Small filled glyphs at 20px in ink (location pin, phone, envelope) in the footer only; Material-style rounded fills.",
      "prov": "observed",
      "source": "https://www.mindrobotics.com/"
    },
    "motion": [
      {
        "name": "pill wipe",
        "use": "Highlight pills and button hovers build from the left through stacked full-pill layers (0 / 50 / 120ms stagger). Animation only: the resting state is the final pill color.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json",
        "easing": "cubic-bezier(0.645, 0.045, 0.355, 1)",
        "duration_ms": 600
      },
      {
        "name": "wordmark reveal",
        "use": "Hero MIND / ROBOTICS letters reveal one by one on load",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "name": "3D scroll scene",
        "use": "A 400lvh sticky section flies the camera through an isometric factory; four task cards (Pick and place, Sorting, Fastening, Connectors) swap with a teal progress pill",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "name": "photo carousels",
        "use": "Full-width 2:1 photo bands auto-advance with a teal growing-pill indicator",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/"
      }
    ],
    "how": "Computed styles at 1440 and 390 (npm run fidelity -- measure), screenshots in ref/, a headless fetch of the home page, its stylesheet and privacy page, and headless Playwright passes that exported the WebGL canvases (illustration renders) and listed network assets.",
    "type": [
      {
        "id": "display-closer",
        "role": "Closer display (\"Get to / know / Mind\")",
        "face": "Figtree 700 (Centra No.2 700 on the site)",
        "size": {
          "desktop": 270,
          "phone": 270
        },
        "line_height": 0.8,
        "tracking_px": -10.8,
        "weight": 700,
        "note": "Desktop and tablet only; the phone page has no closer type (verified at 390). Tracking -0.04em (-10.8px), same as the site. Line boxes 216px, stepped 256.5px apart (see the closer section)."
      },
      {
        "id": "h1",
        "role": "H1 statement with pills",
        "face": "Figtree 700",
        "size": {
          "desktop": 80,
          "phone": 36
        },
        "line_height": 1.4,
        "tracking_px": -3.2,
        "weight": 700,
        "note": "Line pitch 112px desktop / 46.8px phone; pill height 104 / 45px, radius half the height. Tracking -0.04em (-3.2px at 80, -1.44px at 36) in Figtree too: same as the site."
      },
      {
        "id": "h2-pill",
        "role": "Section head in pills",
        "face": "Figtree 700",
        "size": {
          "desktop": 56,
          "phone": 28
        },
        "line_height": 1.3,
        "tracking_px": -2.24,
        "weight": 700,
        "note": "Each line is its own pill 80px (desktop) / 40px (phone) tall; lines stack 5px apart desktop, 2px phone. Tracking -0.04em desktop (-2.24px), -0.03em phone (-0.84px), in Figtree too: same as the site."
      },
      {
        "id": "h2-centered",
        "role": "Centred section head with pills (\"Hands on with hardware every day\")",
        "face": "Figtree 700",
        "size": {
          "desktop": 80,
          "phone": 36
        },
        "line_height": 1.4,
        "tracking_px": -3.2,
        "weight": 700,
        "note": "Same scale as H1, centred; pills 104 / 45px tall; tracking -0.04em."
      },
      {
        "id": "h3",
        "role": "Card statement (careers card)",
        "face": "Figtree 500",
        "size": {
          "desktop": 44,
          "phone": 28
        },
        "line_height": 1.3,
        "tracking_px": -0.53,
        "weight": 500,
        "note": "Site tracking -0.03em desktop, normal phone."
      },
      {
        "id": "h4",
        "role": "Task card title",
        "face": "Figtree 500",
        "size": {
          "desktop": 32,
          "phone": 20
        },
        "line_height": 1.4,
        "tracking_px": 0,
        "weight": 500,
        "note": "Site tracking -0.02em desktop."
      },
      {
        "id": "body-large",
        "role": "Paragraph large (section copy, careers card)",
        "face": "Figtree 400",
        "size": {
          "desktop": 20,
          "phone": 18
        },
        "line_height": 1.5,
        "tracking_px": 0.32,
        "weight": 400,
        "note": "First 2-3 words of each section's first paragraph in 700. Column 559px desktop, full width phone."
      },
      {
        "id": "body-medium",
        "role": "Card body (task card)",
        "face": "Figtree 400",
        "size": {
          "desktop": 16,
          "phone": 13
        },
        "line_height": 1.5,
        "tracking_px": 0.26,
        "weight": 400
      },
      {
        "id": "small",
        "role": "Footer links and legal",
        "face": "Figtree 400",
        "size": {
          "desktop": 13,
          "phone": 13
        },
        "line_height": 1.4,
        "tracking_px": 0.2,
        "weight": 400
      },
      {
        "id": "chip",
        "role": "Skill chip",
        "face": "Figtree 400",
        "size": {
          "desktop": 16,
          "phone": 13
        },
        "line_height": 1.2,
        "tracking_px": 0,
        "weight": 400,
        "note": "Site tracking -0.02em."
      },
      {
        "id": "button",
        "role": "Button label",
        "face": "Figtree 700",
        "size": {
          "desktop": 24,
          "phone": 24
        },
        "line_height": 1.2,
        "tracking_px": -0.65,
        "weight": 700,
        "note": "Same size at every width. Site tracking -0.96px (-0.04em). Always 24px/700 white #FFFFFF on teal #299093: never 16px labels and never ink labels on the teal buttons (white on #299093 passes at 24px bold, which is the only button size the brand uses)."
      }
    ],
    "layout": {
      "page_margin": {
        "desktop": 32,
        "phone": 24
      },
      "section_padding": {
        "desktop": 200,
        "phone": 96
      },
      "container_max": 1376,
      "hero_text_max": 1000,
      "nav_height": 128,
      "gutter": 24,
      "gutter_phone": 16,
      "columns": 12,
      "columns_phone": 6,
      "card_gap": 24,
      "note": "Full-bleed grid: 12 columns (6 on phone) between 32px (24px) outer gutters, 24px (16px) inner gutters; column 92.7px at 1440. Spacer tokens desktop / phone: extra-small 20 / 20, tiny 40 / 40, small 112 / 64 (H1 section top), medium 200 / 96 (section padding), large 256 / 168. Header 128px desktop (32px padding + 64px mark), 112px phone (24px padding). Body copy columns are 5 columns (559px). Inline media take columns 7-12 (676px). No max-width container: the grid scales with the viewport (site CSS targets 1600px).",
      "prov": "observed",
      "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
    },
    "breakpoints": {
      "phone_max": 767,
      "all": [
        768,
        1280,
        1680
      ],
      "note": "min-width 768 (tablet), 1280 (laptop), 1680 (desktop) in the site CSS.",
      "prov": "observed",
      "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
    },
    "components": {
      "button_primary": {
        "height": 40,
        "padding_x": 16,
        "radius": "pill",
        "fill": "#299093",
        "text": "#FFFFFF",
        "font_size": 24,
        "weight": 700,
        "face": "display",
        "anatomy": "Label only, no icon or border. Widths at 1440: Join us 104px, Contact 114px, See open roles 184px, Send email 149px, Copy Address 177px. Two buttons sit 8px apart. Labels are 24px/700 white on teal at every width; the engine fundamentals line \"Buttons and chips with 16px labels: #061A1E on #299093\" does not apply to this brand's buttons (it never sets 16px labels on teal). Chips are #DBD7CA with ink labels.",
        "states": {
          "hover": {
            "css": {
              "background": "#061A1E"
            },
            "measured": {
              "end_fill": "#061A1E",
              "label": "#FFFFFF",
              "layers": "coral #EF6156 at 0ms, yellow #FFBD00 at 50ms, ink #061A1E at 120ms, each sliding in from the left over 600ms cubic-bezier(0.645, 0.045, 0.355, 1)"
            },
            "prov": "observed",
            "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
          },
          "focus": {
            "measured": {
              "outline_offset": "-3px inset (site token --outline-offset-inset)"
            },
            "prov": "observed",
            "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
          }
        },
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "highlight_pill": {
        "height": "104 (80px type) / 80 (56px type) desktop; 45 (36px type) / 40 (28px type) phone",
        "radius": "pill",
        "padding_x": 20,
        "anatomy": "A word group set in a full-round pill. Heights per role (measured, not a ratio): 104px for 80px type and 45px for 36px type (H1, centred head); 80px for 56px type and 40px for 28px type (section heads). Padding 0 20px desktop, 0 12px phone (H1 and section heads alike). Teal #299093 or ink #061A1E pills take #FFFFFF text; coral #EF6156, yellow #FFBD00, white #FFFFFF and #8F8C83 pills take #061A1E text. A lone circle of the same height (coral, yellow or white) can lead a line, 5px before the next pill. In the H1 the pills hang 20px (12px phone) left of the text column so the letters stay on the column edge; in section heads the first pill starts on the margin.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "chip": {
        "height": "32 desktop / 28 phone",
        "radius": "pill",
        "padding_x": 12,
        "fill": "#DBD7CA",
        "text": "#061A1E",
        "anatomy": "16px (13px phone) 400 ink label; chips wrap with 4px gaps both ways.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "careers_card": {
        "radius": 40,
        "fill": "#FFFFFF",
        "ring": "#061A1E",
        "ring_px": 1,
        "anatomy": "Desktop 1376x683, padding 116.7px (one column + gutter); two 506px columns: left the 44px/500 statement, right two body paragraphs, 7 chips, then the teal button 48px below the chips. Phone 342px wide, padding 33px, one column in the same order.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "task_card": {
        "radius": 24,
        "fill": "#FFFFFF",
        "anatomy": "400x218 desktop at the right margin, 32px from the viewport bottom; 342x183 phone. Padding 32px. Title 32 / 20px 500, body 16 / 13px, then 32px below a progress row: one 124x16 (60x12 phone) pill track #DBD7CA with a teal #299093 fill and three 16px (12px) #DBD7CA dots, 3px apart.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "carousel_indicator": {
        "radius": "pill",
        "anatomy": "Centred 32px (24px phone) above the photo band bottom: active item a 124x16 (60x12 phone) #DBD7CA track whose teal #299093 fill grows left to right over the slide time; inactive items 16px (12px) #DBD7CA dots; 3px apart. At rest the track shows unfilled; the fill is animation only.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "media_frame": {
        "radius": 40,
        "fill": "#DBD7CA",
        "ring": "#061A1E",
        "ring_px": 1,
        "anatomy": "676x712 (aspect 19:20) at columns 7-12 desktop, 282x297 phone (columns 2-6). Its child is a WebGL layer that draws the robot hand close-up (library illustration-hand-closeup-open.png, slot media-frame). Settled: fill it with that hand, transparent on #DBD7CA, flush to the top-right at about 92% of the frame width, clipped by the frame's 40px radius. The reference screenshots caught the frame before WebGL drew (empty grey); an empty frame is only that pre-draw instant, not the design.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "contact_dialog": {
        "radius": 72,
        "fill": "#E8E5E0",
        "anatomy": "Opened by the header Contact button: page scrim #061A1E80 with 8px backdrop blur; centred 488x539 card, padding 76px; \"Contact us\" 56px/700; definition list 20/30 (Address, Palo Alto, CA; Phone number, 408-459-9351; Email, press@mindrobotics.com) with 24px between pairs; two teal buttons \"Send email\" and \"Copy Address\" 40px below; \"Close\" with a 20px x glyph centred 40px under the card in white.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "footer_bar": {
        "radius": "pill",
        "fill": "#F6F4F0",
        "anatomy": "Desktop: a 1376x64 full-round bar; phone: a 342x253 card with 40px radius.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      }
    },
    "page": {
      "source": "https://www.mindrobotics.com/",
      "date": "2026-11-10",
      "prov": "observed",
      "voices": "Mind Robotics publishes no brand or writing guide, so there is one observed voice: the homepage (first person plural, plain factory words, no numbers, sentence-case pill heads without periods, full-sentence statements with periods). The site is the brand law here, and landing pages follow this homepage voice and structure.",
      "third_party": "A Cookiebot consent banner (Allow all / Deny) overlays the bottom of the page on first visit; it is not part of the brand layout.",
      "nav": {
        "summary": "No nav links: the ink m mark at left and two teal pill buttons at right, floating on the stone ground and staying in place on scroll.",
        "ground": "transparent over #E8E5E0 (no bar, no border, no shadow; the page scrolls underneath)",
        "height": "128px desktop (32px padding), 112px phone (24px padding)",
        "border": "none",
        "logo": {
          "variant": "m mark, ink #061A1E (mark-on-light.svg)",
          "px": "80x64 at both widths",
          "position": "top-left at 32,32 desktop / 24,24 phone; links to / (\"Go to Mind Robotics home\")"
        },
        "links": {
          "count": "0 text links",
          "labels_in_order": "none",
          "size": "n/a",
          "weight": "n/a",
          "color": "n/a",
          "alignment": "n/a"
        },
        "actions": "Two teal buttons, right-aligned at the margin, 8px apart, top at 32px (24px phone): \"Join us\" (link to https://jobs.ashbyhq.com/mindrobotics) then \"Contact\" (opens the contact dialog). 104x40 and 114x40.",
        "sticky": "Yes: fixed at the top for the whole page, with no ground of its own.",
        "phone": "Same three items at 390: mark at left, Join us and Contact right (Join us at x144, Contact ends at 366). No hamburger menu.",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "hero": {
        "summary": "A text-free hero: the MIND and ROBOTICS wordmark lines span the width over a cel-shaded robot arm descending from the top right, with white capsule and circle shapes and particle clusters behind. The H1 statement follows in its own band below.",
        "desktop": {
          "height": "0-1908px (the header overlays its top)",
          "column_split": "none: full-width composition; MIND left-aligned at x32 (575x173), ROBOTICS right-aligned ending at x1408 (1173x173, starting x235)",
          "vertical_anchors": "MIND top y256, ROBOTICS top y494. Three white shapes at rest (scroll 0, measured with their parallax transform applied): LEFT capsule 420x1050 at x64, top y627 (its crown rises just under ROBOTICS' R, visible from y627 in the 900px fold); CENTRE circle 420x420 at x510, top y1152; RIGHT capsule 420x1050 at x956, top y858 (its crown enters the fold bottom-right at y858). Three shapes on desktop, never two. Never use y795 / y984: those are the layout positions before the scroll parallax and were wrong for the resting page.",
          "text_max_width": "no text in the hero",
          "media": "Arm render full width from y0 (desktop placement is right): upper arm and teal joint entering at top right (x~970-1360 in the fold), forearm diagonally down to the fingertips at about y1870 (overlapping the top of the H1 band). Particles at rest stay at the edges: in the 900px fold one narrow strip at the right edge, x1290-1440, y0-520 (pale dots, beige squares, teal x marks); lower down a cluster around the right capsule's crown (x1150-1430, y690-1080) and a thin drift at the left edge (x0-60, y1070-1400). Never put particles behind MIND or ROBOTICS or in the centre field x200-1100 above y1000.",
          "layering": "ground #E8E5E0; then the LEFT and RIGHT capsules (z behind content); then particles; then the arm; then the CENTRE circle, which sits IN FRONT of the arm and hides part of the wrist (site class z-above-content); then the wordmark lines on top (the arm shows between letters).",
          "cta": "none in the hero"
        },
        "phone": {
          "order": "header, MIND (168x50 at x24 y240), ROBOTICS (342x50 at x24 y326, left-aligned), the arm (placement below), white capsule 109x274 at x24 top y540 (behind the arm), white circle 109px at x140 top y677 (in front of the arm), second white capsule 109x274 at x257 top y601 (behind the arm), then the H1 band at y874. Arm at 390: use illus-arm-hand-render.png at width 580px (149vw), left -185px, top 180px. That puts the teal shoulder joint at x220-365, y245-330 (it overlaps the right end of ROBOTICS), the teal wrist at x90-190, y565-660, and the lowest fingertip at x0-45, about y925, 50px into the H1 band, just above the first pill. Never scale the render wider than 600px or push the shoulder off the right edge. The render's own top edge sits at y180; on the site the upper arm continues straight up to y0 at x195-350 (see gaps). Particles on phone: only two or three beige squares near x200-250, y810-830; no particle field in the upper half.",
          "alignment": "left",
          "sizes": "wordmark lines 50px tall"
        },
        "at_rest": "Every MIND / ROBOTICS letter visible; arm still in the pose of illus-arm-hand-render.png; particles still. The letter-by-letter reveal and the arm and particle motion are animation only.",
        "h1_band": {
          "desktop": "Starts y1908, padding 112px top 32px sides. H1 80px/700, line pitch 112px, at columns 3-11 (x265, max 1000px wide), 3 lines: \"Mind Robotics\" in a teal pill (white text) then plain \"is building\"; \"universally\" in a white pill and \"capable\" in a coral pill, then plain \"robots\"; plain \"to transform industrial work.\" Measured: H1 box y2020-2300, line boxes start y1996 / 2108 / 2220; baseline of \"to transform industrial work.\" at about y2294. First paragraph's first line box top y2350 (text box y2356), so the gap from the visible baseline of the H1 to the paragraph's first line is 56-62px: never more than 64px. Measure that gap on glyphs, not on box edges, because Figtree's line boxes sit differently from Centra's. Two 20/30 paragraphs at x265, 559px wide (5 lines each), the second 20px under the first, first two words bold.",
          "phone": "Starts y874, padding 64px 24px. H1 36/46.8 with 45px pills, exactly 6 lines: \"Mind Robotics\" (teal pill) / \"is building\" / \"universally\" (white pill) / \"capable\" (coral pill) + \"robots\" / \"to transform\" / \"industrial work.\" H1 box y938-1197, then the paragraphs (18/27, full 342px width) 32px below (first at y1229, 7 lines; second 18px below it, 8 lines)."
        },
        "media": "Slots hero-illustration (arm) and hero-particles; wordmark from wordmark-mind-on-light.svg and wordmark-robotics-on-light.svg (never typeset).",
        "type": "Wordmark as SVG; H1 per the h1 type row.",
        "cta": "none",
        "proof": "none (no logos, numbers or quotes on the page; Rivian is named only in body copy)",
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json",
        "h1_copy": [
          "Verbatim from https://www.mindrobotics.com/ (live DOM, 2026-11-10); **bold** marks the <strong> lead-in.",
          "H1: Mind Robotics is building universally capable robots to transform industrial work.",
          "Paragraph 1: **We're starting** where the problems are hardest and the standards are least forgiving: the factory floor. Mind is collecting video data at industrial scale, capturing live, high-variability work as it happens on the line, starting with automotive manufacturing.",
          "Paragraph 2: Our foundation models learn spatial reasoning, object dynamics, and tool manipulation across real production hours, building a scalable intelligence layer that generalizes to new tasks and environments. The hardware we design works alongside the people and systems already in place."
        ]
      },
      "sections": [
        {
          "name": "Photo carousel 1 (full bleed)",
          "summary": "Four factory photos cross-fade in a full-width 2:1 band with two white circles straddling its top edge.",
          "ground": "#DBD7CA behind the photo",
          "desktop": "1440x720 at y2772, object-fit cover, square corners. White circles 288px (20% width) centred on the top edge at x1008 and x1296 (the second cut by the viewport edge). Indicator centred 32px above the bottom: 124x16 track and three 16px dots.",
          "phone": "390x195 (2:1) at y1702; two white circles 78px (20% width) centred on the top edge at x273 and x351 (the second cut by the viewport edge); indicator 60x12 track and 12px dots, 24px above the bottom.",
          "anatomy": [
            "Slides in order: rotor line, stator line 3083, gear line 3105, inverter line",
            "no caption, no overlay, no text",
            "auto-advance; at rest slide 1 with an unfilled track (fill animation only)"
          ],
          "components": [
            "carousel_indicator"
          ]
        },
        {
          "name": "\"Our first robots are / learning on the job\"",
          "summary": "Pill head and two paragraphs at left, a rounded photo at right.",
          "ground": "#E8E5E0",
          "desktop": "Band y3492-4455, padding 200px top. Head at x32: ink pill \"Our first robots are\" (502x80, white text); line 2: 80px yellow circle at x32, coral pill \"learning on the job\" (ink text) at x117. Paragraphs at x32, 559px, 64px below the head. Photo at columns 7-12: x732, 676x450 (3:2), radius 40px, top aligned with the head.",
          "phone": "Head at y1993 (96px under the carousel), pills 40px tall, circle 40px; paragraphs 48px below; photo full width 342x228, radius 40, 80px under the text.",
          "anatomy": [
            "pill head 2 lines, left",
            "lead-in \"With Rivian\" bold",
            "second paragraph 20px under the first",
            "inline photo radius 40, no border"
          ],
          "components": [
            "highlight_pill"
          ],
          "copy": [
            "Verbatim from https://www.mindrobotics.com/ (live DOM, 2026-11-10); **bold** marks the <strong> lead-in.",
            "Head lines: Our first robots are / learning on the job",
            "Paragraph 1: **With Rivian** as our first manufacturing partner, we're building a rich dataset inside a live production facility and training on active vehicle lines. Our data pipeline is centered on learning from skilled operators as they perform highly dexterous tasks, distilling the actions, tools, context, and decisions that make each cycle successful.",
            "Paragraph 2: Mind’s live dataset gives our models a deep understanding of real-world physics, variance, and material behavior. By mastering diverse automotive tasks first, we’re building capabilities that transfer across all of industrial manufacturing.",
            "Verbatim. Desktop: 6 lines then 5 lines at 559px."
          ]
        },
        {
          "name": "\"Intelligence on / the factory floor\" 3D scroll scene",
          "summary": "A 400lvh grey section whose sticky viewport shows an isometric factory scene, the pill head top-left and a task card bottom-right that cycles four tasks.",
          "ground": "#DBD7CA with a 1px #D3D0C5 top border",
          "desktop": "y4455-8055 (3600px = 4 viewports). Sticky 1440x900 view: head at x32, 129px below the section top: teal pill \"Intelligence on\" (white text), line 2 a white 80px circle then white pill \"the factory floor\". Task card 400x218 at the right margin, 32px above the viewport bottom: \"Pick and place\" / \"Sorting\" / \"Fastening\" / \"Connectors\" with one sentence each.",
          "phone": "y2963-6339 (3376px). Head at x24, 113px below the top, 40px pills; task card 342x183 full width at about 640px down the sticky view.",
          "anatomy": [
            "static resting state: illus-pick-and-place-render.png filling the sticky view behind head and card, with the \"Pick and place\" card and its track filled (the reference screenshots caught the scene before WebGL drew and show the plain #DBD7CA ground)",
            "camera fly-through and card swaps are animation only",
            "card copy verbatim from the site (see copy.tasks); at rest only \"Pick and place\" shows"
          ],
          "components": [
            "task_card",
            "highlight_pill"
          ],
          "copy": [
            "Verbatim from https://www.mindrobotics.com/ (live DOM and page data, 2026-11-10); **bold** marks the <strong> lead-in.",
            "Head lines: Intelligence on / the factory floor",
            "Task card \"Pick and place\": Locating, grasping, and placing objects that vary in angle, occlusion, and orientation, with high precision.",
            "Task card \"Sorting\": Making a real-time call on visually similar items and routing each one correctly, under line speed pressure.",
            "Task card \"Fastening\": Joining parts that don't always align, modulating force and sequence to seat them correctly, and recovering when they don't.",
            "Task card \"Connectors\": Achieving a secure, verified fit despite flexible harnesses, part variation, and tight tolerances.",
            "Verbatim. Each task sentence runs 3 lines at 336px (16/24) in the 400px card."
          ]
        },
        {
          "name": "Photo carousel 2 (full bleed)",
          "summary": "Three more factory photos in the same 2:1 band.",
          "ground": "#DBD7CA behind the photo",
          "desktop": "1440x720 at y8055, no circles; indicator 124x16 track and two 16px dots.",
          "phone": "390x195 at y6339.",
          "anatomy": [
            "Slides in order: body-side racks 7163, enduro factory hall 0335, trades tour racks",
            "no text"
          ],
          "components": [
            "carousel_indicator"
          ]
        },
        {
          "name": "\"The work we / always imagined / machines could do\"",
          "summary": "Three-line pill head and two paragraphs left, a bordered grey frame right.",
          "ground": "#E8E5E0",
          "desktop": "Head at y8975 (200px under the carousel): 80px coral circle + coral pill \"The work we\" (ink text); ink pill \"always imagined\" (white text); white pill \"machines could do\". Paragraphs at x32, 559px, 64px under the head. Frame at columns 7-12 (x732, 676x712, radius 40, 1px #061A1E border, #DBD7CA) top-aligned with the head.",
          "phone": "Head at y6630 (40px pills), paragraphs 48px below, frame 282x297 at x84 (columns 2-6) 80px below the text.",
          "anatomy": [
            "lead-in \"Our robots take on\" bold",
            "the frame holds the hand close-up (media_frame)"
          ],
          "components": [
            "highlight_pill",
            "media_frame"
          ],
          "copy": [
            "Verbatim from https://www.mindrobotics.com/ (live DOM, 2026-11-10); **bold** marks the <strong> lead-in.",
            "Head lines: The work we / always imagined / machines could do",
            "Paragraph 1: **Our robots take on** the intricate, often grueling work the world actually runs on, not the rigid, perfectly predictable motions that classical automation has already solved. By focusing on skills that require more reasoning, variability, and dexterity, Mind robots can finally help with tasks that have always depended on human hands.",
            "Paragraph 2: Our aim is to make manufacturing safer, more efficient, and more globally competitive by augmenting human capability.",
            "Verbatim. Desktop: 6 lines then 2 lines at 559px."
          ]
        },
        {
          "name": "\"Hands on with hardware every day\" + careers card",
          "summary": "A centred pill head, then a full-width white card with a statement, copy, skill chips and the See open roles button.",
          "ground": "#E8E5E0; card #FFFFFF",
          "desktop": "Head centred at y10063, 80px/700, 2 lines: yellow pill \"Hands on\" + plain \"with\"; plain \"hardware\" + #8F8C83 pill \"every day\" (ink text). Card 88px below: x32, 1376x683, radius 40, 1px #061A1E border, padding 116.7px; left 506px column the 44px/500 statement, right 506px column (x784) two paragraphs (separated by one blank line), 7 chips (Research and modeling, ML infrastructure, Hardware, Engineering and design, Data, Robotics software, Application Engineer), See open roles button 48px under the chips.",
          "phone": "Head centred at y7716, 36px, 3 lines (yellow \"Hands on\" / plain \"with hardware\" / grey \"every day\"); card 342x838 radius 40 at y7892, padding 33px, single column: statement 28/33.6, paragraphs, chips 28px tall, button.",
          "anatomy": [
            "card has no image",
            "button links to https://jobs.ashbyhq.com/mindrobotics"
          ],
          "components": [
            "highlight_pill",
            "careers_card",
            "chip",
            "button_primary"
          ],
          "copy": [
            "Verbatim from https://www.mindrobotics.com/ (live DOM, 2026-11-10); **bold** marks the <strong> lead-in.",
            "Head lines: Hands on with / hardware every day",
            "Card statement: What you build on the bench today changes how factories run tomorrow.",
            "Paragraph 1: At Mind, we believe that being hands on with hardware can solve the hardest problems in AI.",
            "Paragraph 2: Mind offers the agility of a startup with the resources, data, and built-in customer base of an industrial pioneer. Join us if you value ownership, humility, and want to move beyond digital intelligence to put code into motion.",
            "Chips, in order: Research and modeling; ML infrastructure; Hardware; Engineering and design; Data; Robotics software; Application Engineer",
            "Button: See open roles",
            "Verbatim. The two paragraphs are one <p> split by a blank line (<br><br>); no bold lead-in in the card. Desktop: statement 7 lines at 506px (44/57.2), copy 8 lines at 506px from y10484, chips at y10740 in 3 rows, button at y10892."
          ]
        },
        {
          "name": "\"Get to know Mind\" closer",
          "summary": "Giant three-line display type over white capsules and a circle drawn from the m mark; a 200svh sticky band.",
          "ground": "#E8E5E0",
          "desktop": "Band y11250-13050. 270px/700, line-height 216px; each line is its own block and the blocks step 256.5px (0.95em) apart: line boxes top at y11267 / 11524 / 11780, visible cap tops at about y11344 / 11606 / 11854. \"Get to\" left at x32, \"know\" right-aligned ending x1408, \"Mind\" left at x32. Behind the type, at rest: LEFT white capsule 341x852 at x188, top y11444 (band +194: its crown sits behind the lower half of \"Get to\", so the top of \"Get to\" stands clear above it); white circle 341px at x550, top y11546 (band +296; the \"Play\" button of a small pong game); RIGHT white capsule 341x852 at x912, top y11615 (band +365), bottom y12467. The three tops step down left to right: 11444, 11546, 11615. Never raise the left capsule above y11430.",
          "phone": "No closer type at 390. Only the shapes, in a 306px band (y8826-9132, 40px top padding) directly above the footer card: capsule 90x226 at x54, circle 90px at x150, capsule 90x226 at the right whose bottom runs behind the top of the footer card.",
          "anatomy": [
            "type sits in front of the shapes",
            "static resting state: shapes still as listed, no game running; the pong game and the color fan on hover (teal, coral, yellow, ink circles) are animation only",
            "the circle's \"Play\" label is white on white at rest (invisible)"
          ],
          "components": [],
          "copy": [
            "Verbatim from https://www.mindrobotics.com/; **bold** marks the <strong> lead-in.",
            "Lines: Get to / know / Mind"
          ]
        }
      ],
      "footer": {
        "summary": "One #F6F4F0 full-round bar inside the margins with the mark, contact items with icons at left and legal links at right.",
        "ground": "#E8E5E0 page; bar #F6F4F0",
        "anatomy": [
          "Desktop bar 1376x64 at x32, 32px from the page bottom, full-round; items 13px/18.2 ink, vertically centred",
          "Left, in order: m mark 40x32 at x64 (links to /); 20px location pin + \"Palo Alto, CA\"; 20px phone + \"408-459-9351\" (tel:+14084599351); 20px envelope + \"press@mindrobotics.com\" (mailto); text starts 28px after its icon's left edge; 40px from one item's text to the next icon",
          "Right, in order: \"Privacy\" (/privacy), \"Terms\" (/terms-of-use), \"Your Privacy Choices\" (cookie settings), \"© Mind Robotics 2026\"; 32px apart, last item ending 32px inside the bar",
          "No columns, no newsletter, no social links"
        ],
        "phone": "342x253 card, radius 40, 24px padding: mark top-left (x48); a single list starting x165 (icons) / x193 (text): Palo Alto, CA; 408-459-9351; press@mindrobotics.com (32px pitch); then Privacy; Terms; Your Privacy Choices (30px pitch); © Mind Robotics 2026.",
        "wayfinding": {
          "nav": [
            "(mark) Go to Mind Robotics home",
            "Join us",
            "Contact"
          ],
          "footer": [
            "Palo Alto, CA",
            "408-459-9351",
            "press@mindrobotics.com",
            "Privacy",
            "Terms",
            "Your Privacy Choices",
            "© Mind Robotics 2026"
          ],
          "contact_dialog": [
            "Contact us",
            "Address: Palo Alto, CA",
            "Phone number: 408-459-9351",
            "Email: press@mindrobotics.com",
            "Send email",
            "Copy Address",
            "Close"
          ],
          "address": "Palo Alto, CA (no street address published)",
          "phone": "408-459-9351",
          "copyright": "© Mind Robotics 2026"
        },
        "prov": "observed",
        "source": "https://www.mindrobotics.com/ (headless Playwright, computed styles at 1440 and 390, 2026-11-10); measure/home-desk.json, measure/home-phone.json"
      },
      "dark_ground": {
        "note": "No dark band exists on the site. Ink #061A1E appears only as pills and the hover end state.",
        "secondary_button": "not observed",
        "link": "not observed",
        "muted_text_hex": "not observed (all text is #061A1E or #FFFFFF)",
        "hairline_hex": "not observed",
        "logo_variant": "mark-on-dark.svg (white mark, derived from the site SVG) on ink pills or the #061A1E80 scrim",
        "on_ink_pill": "text #FFFFFF"
      }
    },
    "bands": [
      {
        "label": "Header (fixed)",
        "ground": "transparent over #E8E5E0",
        "content": "mark left, Join us + Contact right",
        "desktop": "128px, padding 32px",
        "phone": "112px, padding 24px",
        "anatomy": [
          "mark 80x64",
          "buttons 40px, 8px apart"
        ]
      },
      {
        "label": "Hero wordmark over 3D arm",
        "ground": "#E8E5E0",
        "content": "MIND / ROBOTICS SVG lines, arm illustration, white capsule + circle, particles",
        "desktop": "y0-1908; MIND y256 left, ROBOTICS y494 right-aligned; capsules at x64 y627 and x956 y858, circle x510 y1152 in front of the arm",
        "phone": "y0-874; both lines left at y240 / y326",
        "anatomy": [
          "no text, no CTA",
          "static arm pose; reveal animation only"
        ]
      },
      {
        "label": "H1 statement + intro",
        "ground": "#E8E5E0",
        "content": "H1 with teal/white/coral pills, two paragraphs",
        "desktop": "y1908-2772, padding 112px top, text at columns 3-11",
        "phone": "y874-1702, padding 64px",
        "anatomy": [
          "H1 80 / 36px",
          "paragraphs 559px / full"
        ]
      },
      {
        "label": "Photo carousel 1",
        "ground": "#DBD7CA",
        "content": "4 photos, 2 white circles on the top edge, indicator",
        "desktop": "1440x720",
        "phone": "390x195",
        "anatomy": [
          "full bleed 2:1, square corners"
        ]
      },
      {
        "label": "Learning on the job",
        "ground": "#E8E5E0",
        "content": "pill head, 2 paragraphs, inline photo",
        "desktop": "y3492-4455, 200px top; text cols 1-5, photo cols 7-12 radius 40",
        "phone": "stacked: head, text, photo",
        "anatomy": [
          "ink + coral pills, yellow circle"
        ]
      },
      {
        "label": "Intelligence on the factory floor (scroll scene)",
        "ground": "#DBD7CA, 1px #D3D0C5 top border",
        "content": "isometric factory render, pill head, task card",
        "desktop": "3600px tall, sticky 900px view",
        "phone": "3376px tall",
        "anatomy": [
          "card bottom-right desktop, full width phone"
        ]
      },
      {
        "label": "Photo carousel 2",
        "ground": "#DBD7CA",
        "content": "3 photos, indicator",
        "desktop": "1440x720",
        "phone": "390x195",
        "anatomy": [
          "no circles"
        ]
      },
      {
        "label": "The work we always imagined",
        "ground": "#E8E5E0",
        "content": "3-line pill head, 2 paragraphs, bordered empty frame",
        "desktop": "text cols 1-5, frame cols 7-12 676x712",
        "phone": "stacked; frame 282x297",
        "anatomy": [
          "coral circle + coral, ink, white pills"
        ]
      },
      {
        "label": "Hands on with hardware + careers card",
        "ground": "#E8E5E0, card #FFFFFF",
        "content": "centred pill head, card with statement, copy, chips, button",
        "desktop": "card 1376x683 radius 40",
        "phone": "card 342x838",
        "anatomy": [
          "yellow + #8F8C83 pills",
          "1px ink card border"
        ]
      },
      {
        "label": "Get to know Mind",
        "ground": "#E8E5E0",
        "content": "270px three-line type over white capsules and circle",
        "desktop": "1800px band; capsule tops y11444 / circle 11546 / capsule 11615",
        "phone": "shapes only, about 306px",
        "anatomy": [
          "know right-aligned",
          "pong game animation only"
        ]
      },
      {
        "label": "Footer bar",
        "ground": "#F6F4F0 bar on #E8E5E0",
        "content": "mark, contact items, legal links, copyright",
        "desktop": "1376x64 full-round",
        "phone": "342x253 radius 40",
        "anatomy": [
          "13px ink, 20px icons"
        ]
      }
    ]
  },
  "system": {
    "fixed": [
      "#E8E5E0 stone ground with #061A1E ink type",
      "Centra No.2 bold headings with tight tracking",
      "Full-round shapes: pills, capsules, circles, round card corners",
      "Teal #299093 pill buttons",
      "Highlighter-pill section heads in the four accent colors",
      "Mark top-left, Join us / Contact top-right"
    ],
    "flex": "Which accent fills each highlight pill (teal, coral, yellow, ink, white, grey), changing line to line.",
    "traits": [
      {
        "is": "Approachable",
        "not": "Militaristic",
        "text": "Rounded shapes, candy pills, cartoon robots",
        "prov": "inferred",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "is": "Grounded",
        "not": "Hyped",
        "text": "No numbers or superlatives; 'factory floor', 'on the line'",
        "prov": "inferred",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "is": "Human-centred",
        "not": "Replacement",
        "text": "'augmenting human capability', 'alongside the people'",
        "prov": "inferred",
        "source": "https://www.mindrobotics.com/"
      },
      {
        "is": "Playful",
        "not": "Corporate",
        "text": "Wipe animations, a Play ball in the closer, staggered giant type",
        "prov": "inferred",
        "source": "https://www.mindrobotics.com/"
      }
    ]
  },
  "formats": [
    {
      "format": "Landing page",
      "level": 2,
      "prov": "observed",
      "source": "https://www.mindrobotics.com/",
      "must": "#E8E5E0 ground; sticky header with ink m mark top-left (80x64) and two teal 40px pill buttons right; hero with giant MIND / ROBOTICS wordmark staggered over a cel-shaded 3D robot arm, white capsules and dots behind; H1 at 80px bold with words in teal / white / coral pills; text column with bold lead-ins; full-bleed 2:1 photo bands; pill section heads; round white careers card (40px radius at 1440) with 1px ink border, grey chips and teal button; closing 270px \"Get to know Mind\" over white capsules; #F6F4F0 rounded footer bar.",
      "voice": "Site voice: we, grounded factory words, no numbers, short button labels."
    },
    {
      "format": "Share card (og:image)",
      "canvas": "1200 x 630",
      "level": 2,
      "prov": "observed",
      "source": "https://www.mindrobotics.com/ (og:image and twitter:image: https://www.datocms-assets.com/221981/1784633509-share-image.png)",
      "must": "Flat #FFFFFF ground; full lockup (ink m mark left, MIND over ROBOTICS right) centred at about 58% of canvas width; nothing else.",
      "flex": "None observed; it is the only share image on the site.",
      "anatomy": [
        "Canvas 1200x630, flat #FFFFFF",
        "Lockup centred, about 700px wide, ink #061A1E; no headline, no image, no CTA"
      ],
      "dont": [
        "Accent-coloured lockup",
        "Adding a headline or photo to the share card"
      ],
      "refs": [
        "og-share-image.png"
      ]
    },
    {
      "format": "Social post",
      "canvas": "1080 x 1080",
      "level": 1,
      "prov": "derived",
      "source": "Derived from the homepage system (https://www.mindrobotics.com/, measure/home-desk.json); no posts observed. The site links no social accounts; X @Mind_Robotics (https://x.com/Mind_Robotics) shows no readable posts without login; no Instagram account found; LinkedIn not checked by rule. Scale: post type = page desktop type x1.4.",
      "must": "Stone #E8E5E0 ground, ink m mark top-left, one Centra 700 head of at most 2 lines with one highlighter pill, image below in its own zone, teal as the only action color.",
      "flex": "Image zone is a full-bleed 2:1 factory photo or the pick-and-place render; pill color teal, coral, yellow or white; optional single body line or CTA (not both). Closest observed family: the og share card (flat white ground, centred ink lockup, no headline); no organic posts or offer ads exist to measure.",
      "anatomy": [
        "Canvas 1080x1080, flat #E8E5E0; outer margin 45px (page 32px gutter x1.4)",
        "Split: text zone top 540px on stone, image zone bottom 540px full-bleed 1080x540 (the page's own 2:1 photo-band ratio); no type in the image zone",
        "Logo: mark-on-light.svg, ink #061A1E, 84x67px at x45 y45 (header mark 80x64 at 1440 = 5.6% of width, x1.4); clear space 45px; never the full lockup or the hero wordmark on a post",
        "Headline: Centra No.2 (stand-in Figtree) 700, 112px (page H1 80px x1.4), line-height 146px (1.3, as the page's 56/72.8 heads), tracking -0.04em, sentence case, no final period; max 2 lines in the split layout, 3 in the all-type variant; max width 990px; second line indented 0.15 of text width as the page steps its head lines (32px then 117px at 1440); top at y176 (64px below the mark)",
        "Highlighter pill: one per head, around 1-3 words, full-round, height about 1.0x font size (about 112px; page pills 80px on the 80px H1); teal #299093 with #FFFFFF text, or coral #EF6156 / yellow #FFBD00 / white #FFFFFF with ink text",
        "Secondary text (all-type variant only): Centra 400, 28px/42px (page body 20/30 x1.4), ink #061A1E, one line, max width 780px, 64px below the headline; bold lead-in words allowed as on the page",
        "Image: a supplied 2400x1200 factory photo (photo-rotor-line.jpg, photo-enduro-line.jpg, photo-body-side-racks.jpg etc.) scaled to 1080x540 with no crop, no overlay, no gradient, no radius; or illus-pick-and-place-render.png cropped 1080x540 from centre on its own stone ground",
        "CTA: nothing by default; if needed, one teal #299093 full-round pill 56px tall with a 34px bold white label (page header button 40px / 24px x1.4), at x45 under the headline, replacing the body line",
        "Signature move: the highlighter pill on the headline, loud (one per post); optional one white #FFFFFF capsule from the mark shape (aspect 2:5) behind the render, quiet",
        "Density: mark, headline, and either the image zone or one body line (or CTA). Four elements at most."
      ],
      "dont": [
        "Headline over 2 lines in the split layout or over 3 in the all-type variant",
        "Headline over 120px or the MIND / ROBOTICS hero wordmark blown up as the post head",
        "Mark wider than 100px or recoloured to an accent",
        "Gaps over 96px between text elements",
        "More than one pill per head, pills on body text, square boxes",
        "Type over photos, gradients, tints or dark grounds (the site has no dark band)",
        "Invented devices: grids (outside the render's own floor grid), outlines, stickers, uppercase eyebrows or labels",
        "A period at the end of a pill head"
      ],
      "refs": [
        "og-share-image.png",
        "home-desk-01.png",
        "home-desk-02.png"
      ]
    }
  ],
  "checks": [
    {
      "name": "Logo",
      "text": "The real m mark or wordmark SVGs in flat ink #061A1E; never an accent color, never retyped."
    },
    {
      "name": "Grounds",
      "text": "Stone #E8E5E0 / #DBD7CA / #F6F4F0 and white cards only; no dark bands, no gradients."
    },
    {
      "name": "Pills",
      "text": "Section heads in full-round highlight pills: white text on teal or ink, ink text on coral, yellow, white or #8F8C83."
    },
    {
      "name": "Type",
      "text": "Centra No.2 (or calibrated stand-in) bold, sentence case, tight tracking; body 18-20px line 1.5; no uppercase labels."
    },
    {
      "name": "Shapes",
      "text": "Everything rounded: pill buttons, 24/40/72px card radii, white capsules and circles from the mark."
    },
    {
      "name": "Imagery",
      "text": "Bright documentary factory photos or cel-shaded ink-outlined 3D; no stock robots, no photoreal renders."
    },
    {
      "name": "Claims",
      "text": "No numbers, customers or awards beyond what the site states (Rivian as first manufacturing partner)."
    }
  ],
  "make_it_yours": {
    "note": "Everything above transfers. These are Mind Robotics's own and must be replaced with yours: name and logo, purpose, positioning, messaging pillars, proof, taglines and boilerplate.",
    "replace": [
      "identity",
      "purpose",
      "positioning",
      "messaging.pillars",
      "messaging.proof_points",
      "messaging.taglines",
      "messaging.boilerplate"
    ],
    "reference": {
      "purpose": {
        "mission": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Our aim is to make manufacturing safer, more efficient, and more globally competitive by augmenting human capability.",
          "where": "Home, \"machines could do\" section",
          "label": "Aim"
        },
        "story": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Starts where the problems are hardest, the factory floor, learning from skilled operators on live automotive lines and moving toward all of industrial manufacturing (paraphrase)."
        }
      },
      "positioning": {
        "statement": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Robots that take on intricate, variable work classical automation has not solved, trained on real factory data (paraphrase)."
        },
        "category": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Industrial robotics and robot foundation models (paraphrase)."
        },
        "audience": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Manufacturers (first partner Rivian) and engineering recruits; the only actions are Join us, Contact and See open roles (paraphrase)."
        },
        "problem": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Rigid automation handles predictable motions; work needing reasoning, variability and dexterity still depends on human hands (paraphrase)."
        },
        "differentiators": [
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "A live dataset captured inside a production facility rather than a lab (paraphrase)"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Startup agility with the resources, data and customer base of an industrial pioneer (paraphrase)"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Augments people and fits existing systems rather than replacing lines (paraphrase)"
          }
        ]
      },
      "messaging": {
        "taglines": [
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Mind Robotics is building universally capable robots to transform industrial work.",
            "where": "Home H1, first section under the hero (pills on Mind Robotics, universally, capable)"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Mind Robotics builds intelligent, broadly capable robots for industrial deployment in high-impact environments.",
            "where": "Meta description and og:description"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Our first robots are learning on the job",
            "where": "Home section head (Rivian section)"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Intelligence on the factory floor",
            "where": "Home scroll section head over the 3D factory scene"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "The work we always imagined machines could do",
            "where": "Home section head"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Hands on with hardware every day",
            "where": "Home careers section head, centred"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "What you build on the bench today changes how factories run tomorrow.",
            "where": "Careers card head"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Get to know Mind",
            "where": "Closing display type, 270px, above the footer"
          }
        ],
        "pillars": [
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Collect video data at industrial scale from live, high-variability work on the line, starting in automotive (paraphrase).",
            "name": "Live factory data"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Foundation models that learn spatial reasoning, object dynamics and tool use from real production hours and generalize to new tasks (paraphrase).",
            "name": "Foundation models"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Hardware designed to work alongside the people and systems already in place (paraphrase).",
            "name": "Hardware that fits in"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Skills shown: pick and place, sorting, fastening, connectors (the four task cards).",
            "name": "Dexterous skills"
          }
        ],
        "proof_points": [
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Rivian is its first manufacturing partner; it builds its dataset inside a live production facility on active vehicle lines (paraphrase).",
            "where": "Home, \"learning on the job\" section"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Based in Palo Alto, CA",
            "where": "Footer"
          },
          {
            "prov": "observed",
            "source": "https://www.mindrobotics.com/",
            "source_note": "2026-11-10",
            "text": "Hiring across research and modeling, ML infrastructure, hardware, engineering and design, data, robotics software and application engineering",
            "where": "Careers card chips"
          }
        ],
        "boilerplate": {
          "prov": "observed",
          "source": "https://www.mindrobotics.com/",
          "source_note": "2026-11-10",
          "text": "Mind Robotics builds intelligent, broadly capable robots for industrial deployment in high-impact environments.",
          "where": "Meta description (the closest thing to a boilerplate; no press release or About page exists)"
        }
      }
    }
  }
}